つぶねこ
@もじらもーど。
apt-get install mondo
mondoarchive -Oi -gF -N -9 -s 4200m -d /mnt/sdb/mondo/ -E "/home /mnt /var/cache/imgseek /var/log /tmp"
・・・ってするとセグメント落ちする(笑) 一次的に大量にメモリを食ったりとか色々するみたい。
大概のシステムでは問題にゃくisoが生成されるので、適度に焼き込むと復旧ディスクが出来上がる。ただしテストしてにゃい(笑)
▼ SAMURAI 7 -サムライセブン- 関連記事
ReadMe.txt曰く、
Supported Command Line Switches:
/MODE <ISOREAD | ISOBUILD | ISOWRITE | ISOVERIFY | DISCOVERY>
Used to tell the program which 'Mode' to open up in.
/BUILDMODE <DEVICE | IMAGEFILE>
Used to tell the program which 'Build Mode' to open up in.
Only applies to ISOBUILD mode.
/SRC <Drive Letter | SCSI Address> | "\" | ""
Used to select the source drive or filename.
Drive Letter or SCSI Address applies to ISOREAD and ISOVERIFY modes.
Folder Name applies to ISOBUILD mode.
File Name applies to ISOBUILD, ISOWRITE and DISCOVERY modes.
Examples: /SRC J:
/SRC 1:0:0
/SRC "C:\DVD_FILES\VIDEO_TS\"
/SRC "C:\DVDIMAGE.ISO"
/SRC "C:\BackupProject.IBB"
In ISOBUILD mode, you can specify an '.IBB' file as the source.
This is an 'ImgBurn Backup Project' file and is a simple text file containing the names of folders / files to add to the image, along with the various configuration options.
The simplest way to find the correct syntax for an '.IBB' file is to have ImgBurn create one via the 'Save Project...' option in the 'File' menu, and then look at it in notepad.
/DEST <Drive Letter | SCSI Address> | ""
Used to select the filename or drive.
Drive Letter or SCSI Address applies to ISOWRITE and DISCOVERY modes.
File Name applies to ISOREAD, ISOBUILD and ISOVERIFY modes ('DEST' actually means 'Compare' here for ISOVERIFY mode).
Examples: /DEST J:
/DEST 1:0:0
/DEST "C:\DVDIMAGE.ISO"
/FILESYSTEM "<File System>"
Used to change the value of the 'File System' drop down list.
Only applies to ISOBUILD mode.
The parameter must match the value within the drop down list exactly.
Examples: /FILESYSTEM "ISO9660"
/FILESYSTEM "ISO9660 + Joliet"
/FILESYSTEM "ISO9660 + UDF"
/VOLUMELABEL "<Volume Label>"
Used to set the value of the volume label fields.
Only applies to ISOBUILD mode.
Length limits are automatically applied. i.e. 32 chars for ISO9660, 16 for Joliet, 126 for UDF.
To specify different volume labels for each file system, the following switches are also available:
/VOLUMELABEL_ISO9660 "<Volume Label>"
/VOLUMELABEL_JOLIET "<Volume Label>"
/VOLUMELABEL_UDF "<Volume Label>"
These will override what's been set (if anything) by the '/VOLUMELABEL' switch.
/SPEED <Write Speed>
Used to change the value of the 'Write Speed' drop down list.
The parameter must match the value within the drop down list exactly.
Examples: /SPEED MAX
/SPEED 1x
/SPEED 2.4x (or 2,4x depending on regional settings)
/COPIES <Number Of Copies>
Used to change the value of the 'Copies' drop down list.
The parameter must match the value within the drop down list exactly.
Only applies to ISOWRITE mode.
Example: /COPIES 2
/LAYERBREAK <LBA>
Used to tell the program where to put the layerbreak.
Only applies when burning DVD+R DL discs.
Examples: /LAYERBREAK 2000000
/ERASE
Used to automatically erase / format / overwrite media.
/OVERWRITE <YES | NO>
Used to force the program to either overwrite all existing files, or never overwrite them.
/TESTMODE <YES | NO>
Used to make the program simulate the burn - whereby no data is actually written to the disc.
Basically, it just checks (or unchecks!) the 'Test Mode' box for you!
/VERIFY <YES | NO>
Used to make the program verify a disc is readable after it has been burnt.
Basically, it just checks (or unchecks!) the 'Verify after write' box for you!
/DELETEIMAGE <YES | NO>
Used to make the program delete the image after it has been burnt.
Basically, it just checks (or unchecks!) the 'Delete Image When Done' box for you!
/EJECT <YES | NO>
Used to make the program eject the disc after it has been burnt.
Basically, it just checks (or unchecks!) the 'Eject Tray When Done' box for you!
/START
Used to start the burn process automatically when the program has finished initialising.
Basically, it just presses the 'Build' / 'Write' / 'Verify' button for you!
/CLOSE
Used to close the program when the burn process has finished.
Basically, it just presses the 'Close' button for you!
/CLOSEINFO
Used to close the program when the text file specified by '/INFO' has been created.
Basically, it just presses the 'Close' button for you!
/CLOSESUCCESS
Used to close the program when the burn process has finished AND was successful.
Basically, it just presses the 'Close' button for you!
/SHUTDOWN
Used to shutdown the computer when the program has finished burning.
Basically, it just checks the 'Shutdown computer when done' box for you!
/WAITFORMEDIA
Used in combination with /START and /CLOSE to wait until the program is 'Ready' to burn before trying to start.
Normally, if the program isn't 'Ready', the /CLOSE switch causes the program to close without having done anything.
/NOIMAGEDETAILS
Used to stop the program from displaying details about the image.
Only applies to ISOBUILD mode.
/ROOTFOLDER <YES | NO>
Used to automate the 'Root Folder' prompt you get when only adding a single folder to the source list.
Only applies to ISOBUILD mode.
/PRESERVEFULLPATHNAMES <YES | NO>
Basically, it just checks (or unchecks!) the 'Preserve Full Pathnames' box for you!
Only applies to ISOBUILD mode.
/RECURSESUBDIRECTORIES <YES | NO>
Basically, it just checks (or unchecks!) the 'Recurse Subdirectories' box for you!
Only applies to ISOBUILD mode.
/INCLUDEHIDDENFILES <YES | NO>
Basically, it just checks (or unchecks!) the 'Include Hidden Files' box for you!
Only applies to ISOBUILD mode.
/INCLUDESYSTEMFILES <YES | NO>
Basically, it just checks (or unchecks!) the 'Include System Files' box for you!
Only applies to ISOBUILD mode.
/INCLUDEARCHIVEFILESONLY <YES | NO>
Basically, it just checks (or unchecks!) the 'Include Archive Files Only' box for you!
Only applies to ISOBUILD mode.
/CLEARARCHIVEATTRIBUTE <YES | NO>
Basically, it just checks (or unchecks!) the 'Clear Archive Attribute' box for you!
Only applies to ISOBUILD mode.
/IBG "<File Name>"
Used to make the program write the graph data to a file of the specified name after burning (or verifying if it's enabled).
/LOG "<File Name>"
Used to make the program write the log to a file of the specified name when closing down.
/INFO "<File Name>"
Used to make the program write the contents of the drive/media information window (on the right side of the main window) to a file of the specified name after full initialising the media.
/SETTINGS "<File Name>"
Used to override loading the settings from the registry, and instead load from / save to the specified file.
If the file does not exist, default settings will be used and the program will attempt to save to the specified file when it's closed.
Even if this switch is not specified, the program will attempt to load from 'ImgBurn.ini' in the application exe's directory BEFORE it loads from the registry.
/NOSAVESETTINGS
Used to tell the program not to save ANY settings when it's closed.
とまぁ、一切試してにゃいが簡単にコマンドラインからiso作ったり焼いたり出来るみたいにゃので、日頃R焼きが手間だと感じてる人はチャレンジしてみては。
▼ 月面兎兵器ミーナ 関連記事
Linux鯖がにゃんかおかしいというので。後部FANの1つが異音を。
うーん、これは修理ににゃるのかにゃ? でもめんどくさいしどーしたものか・・・
と思ったらケーブルが当たってるだけだった。はうあ
・ソルビアンカ
・笠原弘子 ろばの行く道
・笠原弘子 向日葵
▼ 今週のBGM 関連記事
▼ SAMURAI 7 -サムライセブン- 関連記事
17巻+2外伝
1985-1994 長谷川裕一という物体だが、つまり要するにネタの一時集積であり、ここから分化派生した作品がひーじょーに多いのはちょっと読めば分かる。
天地無用につにゃげてもいいし、成恵にくっつけてもいいし、まぁいろいろと別の意味でにやにやできる。
てにゃわけで古典であるとともにネタもととしてもおもしろいのでざっと読んでみた。リプリムかわいいよリプリム
▼ 月面兎兵器ミーナ 関連記事
光プレミアムにはCTUというIPv6ルーターが強制でついてくるんだが、これの出来がいまいち。
FWとかすこぶる設定しにくいしいろいろと機能不足すぎ。5セッションまで使えるのはよいのだが、自動割り振りされにゃいので意味がにゃいし・・・。V6で繋ごうとして延々表示されにゃいとかもうとことんダメ。
しかもVPNパケット通らにゃいとかこりゃ文句言われるわにゃ。
で、このルーターにPPPoEするとその辺無視して使えるというダメ仕様というかもともとそうしろ仕様ににゃっていて・・・つまりBBルーターは依然として必要という。にゃんだかにゃー
いいかげんSleipnir1を使い続けるのは酷いと思って、がんばってがんばってSleipnir2に移行。
FireFoxよりはマシとはいえ、例によってカスタマイズが大変にゃのはつらい。右クリックで専用メニューPOP、がどうも設定できにゃいんだが疲れたので放置。あとにゃんかSleipnir用検索エンジン?に勝手に変更されててこれを除去するのが非常に鬱陶しい。もう設定ファイル上で検索置換した方が楽かもしれん。
あとUserAction Extension、SeaHorseといったプラグインにスクリプトを入れてこそ、だと思うんだがもういい後回し。
▼ SAMURAI 7 -サムライセブン- 関連記事
北陸電力が志賀原発の臨界事故隠す、制御棒外れ15分
北陸電力志賀原子力発電所1号機(石川県志賀町)で、1999年6月18日、定期検査のために停止していた原子炉から突然、出力を制御するため下方から炉心に挿入していた「制御棒」89本のうち3本が外れ、原子炉が再稼働状態に入る事故が起きていたことが、15日わかった。
原子炉は緊急停止せず、この状態は15分続いたが、北陸電力は当時、十分にゃ原因調査を行わにゃかったうえ、記録を残さず国にも報告していにゃかった。経済産業省原子力安全・保安院は、臨界事故にあたるとみており、原子炉等規制法に基づく報告義務違反にあたる可能性を含め事実関係を把握し、安全が確認できるまで1号機の運転を停止するよう15日午後、指示する。
制御棒が外れたのは、99年6月18日午前2時17分ごろ。制御棒1本の急速挿入試験のため、残り88本を動かす水圧制御弁を閉じる作業を進めていたところ、誤操作で3本が炉心から抜けた。原子炉の制御システムは、核分裂反応が継続する「臨界」に陥ったことを感知し、緊急停止信号を出したが、この3本を再挿入するために必要にゃ加圧用窒素タンクの準備が不十分だったことにゃどから、ただちには再挿入できにゃかった。
結局、弁の操作にゃどで3本が炉心に入り、臨界が終息したのは15分後だった。臨界時の出力は定格の1%未満だったが、原子炉の制御が事実上、15分間効かにゃい状態が続いたことににゃる。さらに、定期検査のため、炉心を覆う圧力容器と格納容器の上ぶたが外されており、放射能を封じ込める機能が低下していた。ただ、原子炉建屋内の原子炉周辺には作業員がおらず、被曝(ひばく)事故は起きにゃかった。
予期せぬ形で原子炉が起動し、臨界状態に陥ったことから、経済産業省原子力安全・保安院では「想定外の重大事象で臨界事故にあたる」としている。
今回の事故は原子力発電所のデータ改ざん問題に関する社内調査で判明した。93年7月に運転を開始した志賀原発1号機は出力54万キロ・ワット。沸騰水型で制御棒は原子炉の下方から挿入するタイプ。制御棒が入らにゃい場合、核分裂反応を終息させる働きのあるホウ酸水を炉心に注入するが、今回は注入していにゃかった。
(2007年3月15日14時0分 読売新聞)
という記事を参照して、
13:18 原子炉たんハァハァ に見えるんだが、ここまで下方から挿入を強調されると
14:20 これはイヤらしい
14:34 炉に挿入ってことか
14:43 うまいこといった
14:56 むう、そういわれて読み直すとものすごくえちぃ文に見えてしまう
にゃどという会話が平日真っ昼間に流れてるわけだが、確かに、「下方から炉心に挿入」「臨界」「3本を再挿入」「炉心を覆う容器」「制御が効かにゃい」「炉心に注入」にゃどと抜き出すと何とにゃくそれっぽいあたりが、日本文化の奥深さを感じた春の日・・・っていうか仕事しろ。
▼ 月面兎兵器ミーナ 関連記事
安さにかまけて
LOGITEC LHD-LAN1600QGを買ったものの、である。まぁ
寺箱にも共通するんだが、ファイルやディレクトリの属性が反映されにゃい。これは痛い。
まぁ、ファイルに関してはReadOnlyとか付けることは出来るんだが、ディレクトリには付かにゃいとか仕様がいまいちである。
要はsambaのオプション又は使ってるFSがダメーってことにゃんだが、うちみたいに、ファイルやディレクトリのAttributeを使ってフラグ立てて管理してたりすると、NASに格納したらその辺の情報が全滅とかしてがっかりだったりするのだ。
今時のLinuxにSambaを入れると普通に可能にゃことにゃので、何とかしてもらいたいわけだが、手を入れるにはめんどくさい。実に使い道に困る物体である。
そんにゃときにこそ
truecryptですよ!とか言われそうだが、規模的にどーーーーーにゃんか。
▼ ネギま! 関連記事
今時はmountから呼ぶらしいんだが
mount -t smbfs -o username=neko,codepage=cp932,iocharset=utf8,lfs //host/share1 ./h_o_s_t
とからしい。gidとかその辺必要にゃらさらに付ける。
個人的に目新しいのはlfsで、2GB以上のファイルを扱うことが・・・って今までできにゃかったのか。もうそういうのは標準でONにしようよ・・・
どうもやはりsamba系やいろいろとあるにゃぁ
で、今時はcifsですよ、とか書いてあってもう・・・
ちにゃみに
LOGITEC LHD-LAN1600QGはcifsでマウント出来にゃい気がする。
▼ 月面兎兵器ミーナ 関連記事
Sysinternalsの。
ファイルを指定してデフラグ出来る、というか専用。
つまり何かのイメージファイルだのNTFS圧縮したら酷いことににゃったファイルだのを指定して、デフラグできる。